50
15. Remove four screws (M4x8) fixing each Suction Fan cover.
Figure 4-79.
16. Turning over and extract the Suction Fan the cable connector of the reverse side,then
remove it from the clamp.
Figure 4-80.
17. Remove three screws ( M4x8) , then remove the Suction Fan.
Figure 4-81.
Screw
Screw
Sction Fan Flame
Cable Clump
Cable Connector
A D J U S T M E N T
R E Q U I R E D
Carry out the justification with the L style gauge, when assemble the
sub platen. (Refer to Chapter 5 "the adjustment")
Screw
Sction Fan
To Next Page
Loading...
