Epson StylusPro 10000 - Page 156

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow
1
56
14. Remove two screws fixing the Head ASSY to the Head guide of the right and left.
Figure 4-96.
15. Remove each two screws fixing the Head guide of the right and left.
Figure 4-97.
16. Remove compression spring 9.9 that a few of the lower part of head ASSY raises and
be attached between the head base and head ASSY. Do not transforme the spring.
Figure 4-98.
Head guide
Head guide
Screw
Screw
Spring