Rev. A Product Overview Appendix D-83
TM-H6000/H6000P Service Manual
Confidential
❏ Outer dimensions
❏ Designated Paper (pressure-sensitive paper/paper roll), Type NTP080-080
Note:
The following pressure-sensitive paper (base paper) can be used instead of the designated paper
❏ Paper Roll Core Inner Diameter: 12 mm
Outer Diameter: 18 mm
Note:
Do not use paper rolls where the paper is glued to the core.
TableD-35 Outer dimensions
Item Specifications
Diameter Max.
φ
83 mm
Width/Wind Up Dimension 80 + 0.5 / - 1.0 mm
TableD-36 Designated paper specifications
Country Manufacturer
Japan NAKAGAWA MFG. LTD.
North America NAKAGAWA MFG (USA). Inc.
Europe NAKAGAWA MFG (EUROPE). Gmbh.
Southeast Asia N.A.K. MFG (MALAYSIA). SDN.BHD.
TableD-37 Pressure-sensitive paper can be used instead of designated paper
Paper Type No. Manufacturer
PD160R Shin Oji Paper Ltd.
AF50KS-E Jujo Thermal Oy (Finland)
P350 (F380), P310, P300 Kanzaki Specialty Papers (USA)
To Next Page
Loading...
