Epson TM-T88III series User Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
91 90
TM-T88III series
Specification
(STANDARD)
B
ESC D n1...nk NUL
[Name] Set horizontal tab positions
[Format] ASCII ESC D
n1...nk NUL
Hex 1B 44
n1...nk 00
Decimal 27 68
n1...nk 0
[Range] 1
≤ n ≤ 255
0
≤ k ≤ 32
[Description] Sets horizontal tab positions.
• n specifies the column number for setting a horizontal tab position from the beginning of the
line.
• k indicates the total number of horizontal tab positions to be set.
[Details]
• The horizontal tab position is stored as a value of [character width × n] measured from the
beginning of the line. The character width includes the right-side character spacing, and
double-width characters are set with twice the width of normal characters.
• This command cancels the previous horizontal tab settings.
• When setting n = 8, the print position is moved to column 9 by sending HT.
• Up to 32 tab positions (k = 32) can be set. Data exceeding 32 tab positions is processed as
normal data.
• Transmit [n]k in ascending order and place a NUL code 0 at the end.
• When [n]k is less than or equal to the preceding value [n]k-1, tab setting is finished and the
following data is processed as normal data.
• ESC D NUL cancels all horizontal tab positions.
• The previously specified horizontal tab positions do not change, even if the character width
changes.
• The character width is memorized for each standard and page mode.
[Default] The default tab positions are at intervals of 8 characters (columns 9, 17, 25,...) for font A (12
×
24).
[Reference]
HT

Epson TM-T88III series Specifications

General

Print Method	Thermal line printing
Resolution	180 dpi
Paper Width	79.5 ± 0.5 mm
Print Speed	150 mm/sec
Interface	USB, Serial, Parallel, Ethernet
Autocutter	Partial cut
Dimensions	145 x 195 x 148 mm (W x D x H)
Power	24 V DC ±10%
Power Supply	External power supply (depending on model)
Paper Thickness	0.06 to 0.085 mm