Epson TM-T88III series User Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
B
59 58
TM-T88III series
Specification
(STANDARD)
3.7 Error Processing
3.7.1 Error Types
1) Errors that automatically recover
Table 3.7.1 Errors That Automatically Recover
Error Description
ERROR LED Blinking Pattern
160 ms
Recovery
Print head
temperature
error
The temperature of
the print head is
extremely high.
Recovers automatically
when the print head cools.
Paper roll
cover open
error
Printing on the
paper roll is not
performed correctly
due to a cover-open
Recovers automatically
when cover is closed. The
printer restarts printing with
the line being printed when
the cover was opened.
NOTE: Print head temperature error is not an abnormality.
2) Errors that have the possibility of recovery
Table 3.7.2 Errors That Can Possibly Recover
Error Description
ERROR LED Blinking Pattern
160 ms
Recovery
Autocutter
error
The autocutter does
not work correctly.
Approximately
2.56 s
Recovers by DLE ENQ 1 or
DLE ENQ 2.
NOTE: If the paper jams, turn the printer off and remove jammed paper; then turn the printer on
again.

Epson TM-T88III series Specifications

General

Print Method	Thermal line printing
Resolution	180 dpi
Paper Width	79.5 ± 0.5 mm
Print Speed	150 mm/sec
Interface	USB, Serial, Parallel, Ethernet
Autocutter	Partial cut
Dimensions	145 x 195 x 148 mm (W x D x H)
Power	24 V DC ±10%
Power Supply	External power supply (depending on model)
Paper Thickness	0.06 to 0.085 mm