Epson TM-T88III series User Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
136 135
TM-T88III series
Specification
(STANDARD)
B
GS b n
[Name] Turns smoothing mode on/off
[Format] ASCII GS b
n
Hex 1D 62 n
Decimal 29 98 n
[Range] 0 ≤ n ≤ 255
[Description] Turns smoothing mode on or off.
When the LSB of
n is 0, smoothing mode is turned off.
When the LSB of
n is 1, smoothing mode is turned on.
[Details]
• Only the lowest bit of n is valid.
• Smoothing mode is available for built-in, user-defined characters.
• Even if smoothing mode is turned on, smoothing is not performed when either of character
width or character height is the normal size.
[Default]
n = 0
[Reference]
ESC !, GS !
GS f n
[Name] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f
n
Hex 1D 66 n
Decimal 29 102 n
[Range] n = 0, 1, 48, 49
[Description] Selects a font for the HRI characters used when printing a bar code.
n selects a font from the following table:
n Font
0, 48
Font A (12
× 24)
1, 49
Font B (9
× 17)
[Details] • HRI indicates Human Readable Interpretation.
• HRI characters are printed at the position specified by GS H.
[Default]
n = 0
[Reference]
GS H, GS k

Epson TM-T88III series Specifications

General

Print Method	Thermal line printing
Resolution	180 dpi
Paper Width	79.5 ± 0.5 mm
Print Speed	150 mm/sec
Interface	USB, Serial, Parallel, Ethernet
Autocutter	Partial cut
Dimensions	145 x 195 x 148 mm (W x D x H)
Power	24 V DC ±10%
Power Supply	External power supply (depending on model)
Paper Thickness	0.06 to 0.085 mm