Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
97 96
TM-T88III series
Specification
(STANDARD)
B
ESC T n
[Name] Select print direction in page mode
[Format] ASCII ESC T
n
Hex 1B 54 n
Decimal 27 84 n
[Range] 0 ≤ n ≤ 3
48
≤ n ≤ 51
[Description] Selects the print direction and starting position in page mode.
n specifies the print direction and starting position as follows:
n Print Direction Starting Position
0, 48 Left to right Upper left
(A in the figure)
1, 49 Bottom to top Lower left
(B in the figure)
2, 50 Right to left Lower right
(C in the figure)
3, 51 Top to bottom Upper right
(D in the figure)
A
B
C
D
Print area
Forward
[Details]
• When the command is input in standard mode, the printer executes only internal flag
operation. This command does not affect printing in standard mode.
• This command sets the position where data is buffered within the printing area set by ESC W.
• Parameters for horizontal or vertical motion units (x or y) differ as follows, depending on the
starting position of the printing area:
① If the starting position is the upper left or lower right of the printing area, data is buffered
in the direction perpendicular to the paper feed direction:
Commands using horizontal motion units:
ESC SP, ESC $, ESC \
Commands using vertical motion units:
ESC 3, ESC J, GS $, GS \
② If the starting position is the upper right or lower left of the printing area, data is buffered
in the paper feed direction:
Commands using horizontal motion units:
ESC 3, ESC J, GS $, GS \
Commands using vertical motion units:
ESC SP, ESC $, ESC \
[Default]
n = 0
[Reference]
ESC $, ESC L, ESC W, ESC \, GS $, GS P, GS \
To Next Page
Loading...
Need help?
General
