Epson TM-T88III series User Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
89 88
TM-T88III series
Specification
(STANDARD)
B
ESC = n
[Name] Set peripheral device
[Format] ASCII ESC =
n
Hex 1B 3D n
Decimal 27 61 n
[Range] 1 ≤ n ≤ 255
[Description] Selects device to which host computer sends data, using
n as follows:
Bit Off/On Hex Decimal Function
0 Off 00 0 Printer disabled.
On 01 1 Printer enabled
1-7 - - - Undefined.
[Details] • When the printer is disabled, it ignores all data except for error-recovery commands (DLE
EOT, DLE ENQ, DLE DC4
) until it is enabled by this command.
[Default]
n = 1
ESC ? n
[Name] Cancel user-defined characters
[Format] ASCII ESC ?
n
Hex 1B 3F n
Decimal 27 63 n
[Range] 32 ≤ n ≤ 126
[Description] Cancels user-defined characters.
[Details]
• This command cancels the pattern defined for the character code specified by n. After the
user-defined characters is canceled, the corresponding pattern for the internal character is
printed.
• This command deletes the pattern defined for the specified code in the font selected by
ESC !.
• If a user-defined character has not been defined for the specified character code, the printer
ignores this command.
[Reference]
ESC &, ESC %

Epson TM-T88III series Specifications

General

Print Method	Thermal line printing
Resolution	180 dpi
Paper Width	79.5 ± 0.5 mm
Print Speed	150 mm/sec
Interface	USB, Serial, Parallel, Ethernet
Autocutter	Partial cut
Dimensions	145 x 195 x 148 mm (W x D x H)
Power	24 V DC ±10%
Power Supply	External power supply (depending on model)
Paper Thickness	0.06 to 0.085 mm