Epson TM-T88III series User Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
3 2
TM-T88III series
Specification
(STANDARD)
B
8) Paper feed speed: Approximately 150 mm/s {approximately 5.9"/s}
(continuous paper feeding)
9) Line spacing (default): 4.23 mm {1/6"}
Programmable by control command.
1.2 Character Specifications
1) Number of characters: Alphanumeric characters: 95
Extended graphics: 128 × 11 pages
(including one space page)
International characters: 37
Japanese model: JIS (JIS X0208-1990):
Level 1: 3489
Level 2: 3390
Multilingual character model supports printing with one of the following
character sets:
➀ Simplified Chinese (GB2312)
7580
(Using the GB5199 of the Chinese national standard font)
➁ Traditional Chinese (Big 5)
13494
➂ Thai characters (3-pass printing font)
128 characters × 7 pages
(133 character types)
➃ Korean Kanji (KS C5601)
8366
2) Character structure: Font A: 12 × 24 (including 2-dot spacing in horizontal)
Font B: 9 × 17 (including 2-dot spacing in horizontal)
Kanji: 24 × 24
Thai font: 12 × 72, 9 × 51
Font A is selected as the default

Epson TM-T88III series Specifications

General

Print Method	Thermal line printing
Resolution	180 dpi
Paper Width	79.5 ± 0.5 mm
Print Speed	150 mm/sec
Interface	USB, Serial, Parallel, Ethernet
Autocutter	Partial cut
Dimensions	145 x 195 x 148 mm (W x D x H)
Power	24 V DC ±10%
Power Supply	External power supply (depending on model)
Paper Thickness	0.06 to 0.085 mm