Epson TM-T88III series User Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
B
App.17 App.16
TM-T88III series
Specification
(STANDARD)
APPENDIX J: CODE128 BAR CODE
J.1 Description of the CODE128 Bar Code
In CODE128 bar code system, it is possible to represent 128 ASCII characters and 2-digit numerals
using one bar code character that is defined by combining one of the 103 bar code characters and 3
code sets. Each code set is used for representing the following characters:
• Code set A: ASCII characters 00H to 5FH
• Code set B: ASCII characters 20H to 7FH
• Code set C: 2-digit numeral characters using one character (100 numerals from 00 to 99)
The following special characters are also available in CODE128:
• SHIFT characters
In code set A, the character just after SHIFT is processed as a character for code set B. In code
set B, the character just after SHIFT is processed as the character for code set A. SHIFT
characters cannot be used in code set C.
• Code set selection character (CODE A, CODE B, CODE C)
This character switches the following code set to code set A, B, or C.
• Function character (FNC1, FNC2, FNC3, FNC4)
The usage of function characters depends on the application software. In code set C, only FNC1
is available.

Epson TM-T88III series Specifications

General

Print Method	Thermal line printing
Resolution	180 dpi
Paper Width	79.5 ± 0.5 mm
Print Speed	150 mm/sec
Interface	USB, Serial, Parallel, Ethernet
Autocutter	Partial cut
Dimensions	145 x 195 x 148 mm (W x D x H)
Power	24 V DC ±10%
Power Supply	External power supply (depending on model)
Paper Thickness	0.06 to 0.085 mm