Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
104 103
TM-T88III series
Specification
(STANDARD)
B
ESC c 4 n
[Name] Select paper sensor(s) to stop printing
[Format] ASCII ESC c 4
n
Hex 1B 63 34 n
Decimal 27 99 52 n
[Range] 0 ≤ n ≤ 255
[Description] Selects the paper sensor(s) used to stop printing when a paper-end is detected, using
n as
follows:
Bit Off/On Hex Decimal Function
0 Off 00 0 Paper roll near end sensor disabled.
On 01 1 Paper roll near end sensor enabled.
1 Off 00 0 Paper roll near end sensor disabled.
On 02 2 Paper roll near end sensor enabled.
2-7 - - - Undefined.
[Details] • When a paper sensor is enabled with this command, printing is stopped only when the
corresponding paper is selected for printing.
• When a paper-end is detected by the paper roll sensor, the printer goes offline after printing
stops.
• When either bit 0 or 1 is on, the printer selects the paper roll near-end sensor for the paper
sensor to stop printing.
[Default]
n = 0
To Next Page
Loading...
