Epson TM-T88III series User Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
148 147
TM-T88III series
Specification
(STANDARD)
B
FS −
−−
− n
[Name] Turn underline mode on/off for Kanji characters
[Format] ASCII FS
− n
Hex 1C 2D n
Decimal 28 45 n
[Range] 0
≤ n ≤ 2, 48 ≤ n ≤ 50
[Description] Turns underline mode for Kanji characters on or off, based on the following values of
n.
n
Function
0, 48 Turns off underline mode for Kanji characters
1, 49 Turns on underline mode for Kanji characters (1-dot thick)
2, 50 Turns on underline mode for Kanji characters (2-dot thick)
[Notes] • The printer can underline all characters (including right- and left-side character spacing), but
cannot underline the space set by
HT and 90° clockwise-rotated characters.
• After the underline mode for Kanji characters is turned off by setting n to 0, underline printing
is no longer performed, but the previously specified underline thickness is not changed. The
default underline thickness is 1 dot.
• The specified line thickness does not change even when the character size changes.
• It is possible to turn underline mode on or off using FS !, and the last received command is
effective.
[Default]
n = 0
[Reference]
FS !

Epson TM-T88III series Specifications

General

Print Method	Thermal line printing
Resolution	180 dpi
Paper Width	79.5 ± 0.5 mm
Print Speed	150 mm/sec
Interface	USB, Serial, Parallel, Ethernet
Autocutter	Partial cut
Dimensions	145 x 195 x 148 mm (W x D x H)
Power	24 V DC ±10%
Power Supply	External power supply (depending on model)
Paper Thickness	0.06 to 0.085 mm