Epson TM-T88III series User Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
147 146
TM-T88III series
Specification
(STANDARD)
B
FS &
[Name] Select Kanji character mode
[Format] ASCII FS &
Hex 1C 26
Decimal 28 38
[Description] Selects Kanji character mode.
[Notes]
• When the Kanji character code system is SHIFT JIS, the printer performs only internal flag
operations. Printing is not affected.
[Notes] For Japanese model:
• This command is effective only when the JIS code system is selected.
• When the Kanji character mode is selected, the printer processes all Kanji code for each two
bytes.
• Kanji codes are processed in the order of the first byte and second byte.
• Kanji character mode is not selected when the power is turned on.
• Using FS C, the Kanji character code system is selected.
For Simplified Chinese/Traditional Chinese/Korean model:
• When the kanji character mode is selected, the printer checks whether the code is for Kanji or
not, then processed the first byte and the second byte if the code is for Kanji.
• Kanji codes are processed in the order of the first byte and second byte.
• Kanji character mode is not selected when the power is turned on.
• Kanji codes are processed in the order of the first byte and second byte.
[Reference]
FS ., FS C

Epson TM-T88III series Specifications

General

Print Method	Thermal line printing
Resolution	180 dpi
Paper Width	79.5 ± 0.5 mm
Print Speed	150 mm/sec
Interface	USB, Serial, Parallel, Ethernet
Autocutter	Partial cut
Dimensions	145 x 195 x 148 mm (W x D x H)
Power	24 V DC ±10%
Power Supply	External power supply (depending on model)
Paper Thickness	0.06 to 0.085 mm