Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
153 152
TM-T88III series
Specification
(STANDARD)
B
FS W n
[Name] Turn quadruple-size mode on/off for Kanji characters
[Format] ASCII FS W
n
Hex 1C 57
n
Decimal 28 87
n
[Range] 0
≤ n ≤ 255
[Description] Turns quadruple-size mode on or off for Kanji characters.
• When the LSB of n is 0, quadruple-size mode for Kanji characters is turned off.
• When the LSB of n is 1, quadruple-size mode for Kanji characters is turned on.
[Notes]
• Only the lowest bit of n is valid.
• In quadruple-size mode, the printer prints the same size characters as when double-width
and double-height modes are both turned on.
• When quadruple-size mode is turned off using this command, the following characters are
printed in normal size.
• When some of the characters on a line are different in height, all the characters on the line
are aligned at the baseline.
• FS ! or GS ! can also select and cancel quadruple-size mode by selecting double-height and
double-width modes, and the setting of the last received command is effective.
[Default]
n = 0
[Reference]
FS !, GS !
App.1
To Next Page
Loading...
