Epson TM-T88III series User Manual

Confidential
TITLE
SHEET
REVISION
NO.
SHEETNEXT
B
TM-T88III series
Specification
(STANDARD)
EPSON
APPENDIX A: MISCELLANEOUS NOTES ................................................................................App.1
APPENDIX B: PAPER ROLL SETUP.........................................................................................App.4
APPENDIX C: ADJUSTING THE PAPER ROLL NEAR-END SENSOR LOCATION.................App.5
APPENDIX D: RECOVERY FROM THE AUTO CUTTER ERROR............................................App.7
APPENDIX E: PRINT HEAD CLEANING ...................................................................................App.8
APPENDIX F: NOTES ON USING THE DRAWER KICK-OUT CONNECTOR.........................App.9
APPENDIX G: TRANSMISSION STATUS IDENTIFICATION..................................................App.10
APPENDIX H: CONFIGURING THE SPACE PAGE ................................................................App.11
APPENDIX I: EXAMPLE PRINTING IN PAGE MODE............................................................App.13
APPENDIX J: CODE128 BAR CODE ......................................................................................App.16
APPENDIX K: COMPARISON TABLE BETWEEN TM-T88III AND TM-T88II ........................App.20
VI
1

Epson TM-T88III series Specifications

General

Print Method	Thermal line printing
Resolution	180 dpi
Paper Width	79.5 ± 0.5 mm
Print Speed	150 mm/sec
Interface	USB, Serial, Parallel, Ethernet
Autocutter	Partial cut
Dimensions	145 x 195 x 148 mm (W x D x H)
Power	24 V DC ±10%
Power Supply	External power supply (depending on model)
Paper Thickness	0.06 to 0.085 mm