Epson TM-T88III series User Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
117 116
TM-T88III series
Specification
(STANDARD)
B
[Details]
• This command is all characters (alphanumeric and Kanji) effective except for HRI characters.
• If n is outside of the defined range, this command is ignored.
• In standard mode, the vertical direction is the paper feed direction, and the horizontal
direction is perpendicular to the paper feed direction. However, when character orientation
changes in 90
° clockwise-rotation mode, the relationship between vertical and horizontal
directions is reversed.
• In page mode, vertical and horizontal directions are based on the character orientation.
• When characters are enlarged with different sizes on one line, all the characters on the line
are aligned at the baseline.
• The ESC ! command can also turn double-width and double-height modes on or off.
However, the setting of the last received command is effective.
[Default]
n = 0
[Reference]
ESC !

Epson TM-T88III series Specifications

General

Print Method	Thermal line printing
Resolution	180 dpi
Paper Width	79.5 ± 0.5 mm
Print Speed	150 mm/sec
Interface	USB, Serial, Parallel, Ethernet
Autocutter	Partial cut
Dimensions	145 x 195 x 148 mm (W x D x H)
Power	24 V DC ±10%
Power Supply	External power supply (depending on model)
Paper Thickness	0.06 to 0.085 mm