Epson TM-T88III series User Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
B
App.14 App.13
TM-T88III series
Specification
(STANDARD)
APPENDIX I: EXAMPLE PRINTING IN PAGE MODE
Example use of page mode is described in this appendix.
A typical procedure for transmitting commands in page mode is as follows:
① Transmit ESC L to enter page mode.
② Specify the printable area using ESC W.
③ Specify the printing direction using ESC T.
④ Transmit the print data.
⑤ Collectively print the data by sending an FF.
⑥ After printing, the printer automatically returns to standard mode.
Example 1: Sample program in BASIC (assumes transmission to the printer is already
possible with file #1 open)
100 PRINT #1,CHR$(&H1B);"L";
110 PRINT #1,CHR$(&H1B);"W";CHR$(0);CHR$(0);CHR$(0);CHR$(0);
120 PRINT #1,CHR$(200);CHR$(0);CHR$(144);CHR$(1);
130 PRINT #1,CHR$(&H1B);"T";CHR$(0);
140 PRINT #1,"Page mode lesson TEST 1"
150 PRINT #1,CHR$(&HC);
In the program for Example 1, a printable area of 200
× 400 dots starting at (0,0) is set, and characters
are printed on the first line of the area as shown in Figure I.1.
(0,0)
200
400
Page mode lesson
TEST 1
← Printable area
← Paper
Figure I.1 Page Mode Example 1

Epson TM-T88III series Specifications

General

Print Method	Thermal line printing
Resolution	180 dpi
Paper Width	79.5 ± 0.5 mm
Print Speed	150 mm/sec
Interface	USB, Serial, Parallel, Ethernet
Autocutter	Partial cut
Dimensions	145 x 195 x 148 mm (W x D x H)
Power	24 V DC ±10%
Power Supply	External power supply (depending on model)
Paper Thickness	0.06 to 0.085 mm