Epson WF-7210 series - Connecting to the Network Using the Installer

5. Conrm the settings by pressing the d button, and then press the OK button.
6. Press the OK button to nish.
When you select Print connection report, you can print the diagnosis result.
Related Information
& “Making Wi-Fi Settings from the Control Panel (WPS)” on page 78
& “Changing from Wi-Fi Connection to Ethernet Connection” on page 81
Connecting to the Network Using the Installer
We recommend using the installer to connect the printer to a computer. You can run the installer using one of the
following methods.
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the soware disc (only for the models that come with a soware disc and users with computers
with disc drives.)
Insert the soware disc into the computer, and then follow the on-screen instructions.
Selecting the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Administrator's Guide
Connection
24