Epson WF-7210 series - Setting the Proxy Server

7. If you select Manual, enter the IP address for the primary DNS server.
Press the
u or d button to enter. Press the l or r button to move the cursor.
8. Enter the IP address for the secondary DNS server.
Press the
u or d button to enter. Press the l or r button to move the cursor.
9. Press the OK button to
nish.
Press the
button several times as necessary to return to the home screen.
e
home screen is automatically
displayed
aer
a
specic
length of time if you do not press the
button.
Setting the Proxy Server
If you have built a proxy server in your network environment, set up the proxy server.
1.
Select Settings on the home screen on the printer's control panel.
Note:
If the screen is turned o, press any button on the control panel.
2. Select System Administration.
Administrator's Guide
Connection
19