Epson WF-7210 series - Epsonnet Print (Windows Only); Epsonnet Setupmanager; Assigning an IP Address Using Epsonnet Config; Assigning IP Address Using Batch Settings

Running EpsonNet Cong - Windows
Select All Programs > EpsonNet > EpsonNet Cong SE > EpsonNet Cong.
Note:
If the rewall alert appears, allow access for EpsonNet Cong.
Running EpsonNet Cong - Mac OS
Select Go > Applications > Epson
Soware
> EpsonNet > EpsonNet
Cong
SE > EpsonNet
Cong
.
EpsonNet Print (Windows Only)
EpsonNet Print is a soware to print on the TCP/IP network. ere are features and restrictions listed below.
❏
e
printer’s status is displayed on the spooler screen.
❏ If the printer’s IP address is changed by DHCP, the printer is still detected.
❏ You can use a printer located on a dierent network segment.
❏ You can print using one of the various protocols.
❏ IPv6 address is not supported.
EpsonNet SetupManager
EpsonNet SetupManager is a soware to create a package for a simple printer installation, such as installing the
printer driver, installing EPSON Status Monitor and creating a printer port. is soware allows the administrator
to create unique soware packages and distribute them among groups.
For more information, visit your regional Epson website.
Assigning an IP Address Using EpsonNet Cong
You can assign an IP address to the printer using EpsonNet
Cong
. EpsonNet
Cong
allows you to assign an IP
address to a printer that has not been assigned one aer connecting using an Ethernet cable. When connecting to
Wi-Fi, connect to Ethernet once, and then change the connection to Wi-Fi.
Assigning IP Address Using Batch Settings
Creating the File for Batch Settings
Using the MAC address and model name as the keys, you can create a new SYLK le to set the IP address.
When you connect the printer to Wi-Fi, assign an IP address by following the procedures, and then change the
connection to Wi-Fi.
1. Open a spreadsheet application (such as
Microso
Excel) or a text editor.
Administrator's Guide
Appendix
74