Epson WF-7210 series - Checking the Connection Using a Ping Command - Mac os

4. Check the communication status.
If the printer and the computer are communicating, the following message is displayed.
If the printer and the computer are not communicating, the following message is displayed.
Checking the Connection Using a Ping Command - Mac OS
You can use a Ping command to make sure the computer is connected to the printer. Follow the steps below to
check the connection using a Ping command.
1. Check the printer's IP address for the connection that you want to check.
You can check this from the Network Status screen on the printer's control panel, a connection report, or the
IP Address column of a network status sheet.
Administrator's Guide
Solving Problems
59