Note:
You can also update the rmware using Epson Device Admin. You can visually conrm the rmware information on the
device list. It is useful when you want to update multiple devices'
rmware.
See the Epson Device Admin guide or help for
more details.
Related Information
& “Accessing Web
Cong
” on page 27
& “Epson Device Admin” on page 73
Updating Firmware by Using Epson Firmware Updater
You can download the device's rmware from Epson website on the computer, and then connect the device and the
computer by USB cable to update the rmware. If you cannot update over the network, try this method.
1.
Access Epson website and download the rmware.
2. Connect the computer that contains the downloaded rmware to the device by USB cable.
3. Double-click the downloaded .exe le.
Epson Firmware Updater starts.
4. Follow the on-screen instructions.
Backing Up the Settings
By exporting the setting items on Web
Cong
, you can copy the items to the other printers.
Export the settings
Export each setting for the printer.
1. Access Web Cong, and then select the Device Management tab > Export and Import Setting Value >
Export.
2. Select the settings that you want to export.
Select the settings you want to export. If you select the parent category, subcategories are also selected.
However, subcategories that cause errors by duplicating within the same network (such as IP addresses and so
on) cannot be selected.
3.
Enter a password to encrypt the exported le.
You need the password to import the le. Leave this blank if you do not want to encrypt the le.
Administrator's Guide
Operation and Management Settings
54