Epson WF-7210 series - Checking the Network Connection Status

Select the connection type and then click Next.
Using Wi-Fi Direct (Simple AP) Connection
You can directly connect to the printer without going through the connected network by using Wi-Fi Direct
(Simple AP) from a smartphone or tablet when the administrator permits direct connection.
When you use NFC from a smartphone or tablet, Wi-Fi Direct (Simple AP) must be enabled.
Enabling Wi-Fi Direct (Simple AP)
1. Access Web Cong and select the Network tab > Wi -Fi D i re c t.
2. Select Enable for Wi - Fi Di r e c t .
3. Click Next.
4. Click OK.
e
network is re-connected, and then Wi-Fi Direct (Simple AP) is enabled.
Note:
By clicking Delete you can delete the registered device information connected by Wi-Fi Direct (Simple AP).
Related Information
&
“Accessing Web
Cong
” on page 27
Administrator's Guide
Connection
25