Related Information
& “Accessing Web Cong” on page 27
Controlling Using Protocols
You can print using a variety of pathways and protocols. If you are using a multi-function printer, you can use
network scanning and PC-FAX from an
unspecied
number of network computers. You can lower unintended
security risks by restricting printing from specic pathways or by controlling the available functions.
Controlling protocols
Congure the protocol settings.
1. Access Web
Cong
and then select the Network Security tab > Protocol.
2. Congure each item.
3. Click Next.
4. Click OK.
e
settings are applied to the printer.
Protocols you can Enable or Disable
Protocol Description
Bonjour Settings You can specify whether to use Bonjour. Bonjour is used to search for devices, print (AirPrint),
and so on.
SLP Settings You can enable or disable the SLP function. SLP is used for network searching in EpsonNet
Cong.
WSD Settings You can enable or disable the WSD function. When this is enabled, you can add WSD devices
or print from the WSD port.
LLTD Settings You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
LLMNR Settings You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
LPR Settings You can specify whether or not to allow LPR printing. When this is enabled, you can print from
the LPR port.
RAW(Port9100) Settings You can specify whether or not to allow printing from the RAW port (Port 9100). When this is
enabled, you can print from the RAW port (Port 9100).
IPP Settings You can specify whether or not to allow printing from IPP. When this is enabled, you can print
over the Internet (including AirPrint).
Administrator's Guide
Product Security Settings
42
To Next Page
Loading...
Need help?
General
