Epson WF-7210 series - Making System Settings; Setting the Control Panel; Power Saving Settings During Inactivity; Synchronizing the Date and Time with Time Server

Making System Settings
Setting the Control Panel
Setup for the printer's control panel. You can set up as follows.
1. Access Web Cong and select the Device Management tab > Control Panel.
2. Set up the following items as necessary.
❏ Language
Select the displayed language on the control panel.
❏ Panel Lock
If you select ON, the administrator password is required when you perform an operation that requires the
administrator's authority. If the administrator password is not set, panel lock is disabled.
3. Click OK.
Related Information
& “Accessing Web Cong” on page 27
Power Saving Settings During Inactivity
Make the power saving setting for the printer's period of inactivity. Set the time depending on your usage
environment.
Note:
You can also make the power saving settings on the printer's control panel.
1. Access Web Cong and select the Device Management tab > Power Saving.
2. Enter the time for the Sleep Timer to switch to power saving mode when inactivity occurs.
You can set up to 240 minutes by the minute.
3. Select the turning o time for the Power O Timer.
4.
Click OK.
Related Information
& “Accessing Web Cong” on page 27
Synchronizing the Date and Time with Time Server
If you use a CA certicate, you can prevent trouble with the time.
1. Access Web Cong and select the Device Management tab > Date and Time > Time S er ver.
Administrator's Guide
Function Settings
34