Epson WF-7210 series - Using Port for the Printer

Note:
You can also change the connection method by using EpsonNet Cong or Epson Device Admin. For details, see the guide or
help for each
soware.
Related Information
& “Accessing Web Cong” on page 27
& “EpsonNet Config” on page 73
& “Epson Device Admin” on page 73
Using Port for the Printer
e printer uses the following port. ese ports should be allowed to become available by the network
administrator as necessary.
Sender (Client) Use Destination
(Server)
Protocol Port Number
Printer When Epson Connect is used Epson Connect
Server
HTTPS 443
XMPP 5222
When printing from Google Cloud
Print
Google Cloud
Print Server
HTTPS 443
XMPP 5222
Control WSD Client computer WSD (TCP) 5357
Client computer Discover the printer from an
application such as EpsonNet Cong
and printer driver.
Printer ENPC (UDP) 3289
Collect and set up the MIB information
from an application such as EpsonNet
Cong and printer driver.
Printer SNMP (UDP) 161
Forwarding LPR data Printer LPR (TCP) 515
Forwarding RAW data Printer RAW (Port9100)
(TCP)
9100
Forwarding AirPrint (IPP/IPPS printing)
data
Printer IPP/IPPS (TCP) 631
Searching WSD printer Printer WS-Discovery
(UDP)
3702
Administrator's Guide
Appendix
82