Erbe VIO 200 D - Modifications for VIO Version 1.4.x

2 • Modifications
12 / 144
Art.-Nr.: 80116-271 04.06
As from VIO version 1.4.x
Hardware
Software
Tes t pr o g ra m s New “Measured values” test program.
Test program mode can also be called up when the unit is
ON.
Component affected Description of the modification
Component affected Description of the modification
APC 2 module In addition to the APC receptacle, another receptacle can be
added. The second receptacle can be either a multifunctional
(only in conjunction with a VIO 300 D), monopolar, bipolar or
APC receptacle.
VEM 2 module The VEM 2 can expand the VIO HF surgical unit by up to two
receptacles. It can accommodate multifunctional receptacles
(only in conjunction with a VIO 300 D), monopolar recepta
-
cles, and bipolar receptacles.
Component affected Description of the modification
VIO module New modes:
ENDO CUT I
ENDO CUT Q
SET-UP settings New SET-UP settings:
APC AutoPurge
APC PurgeDuration
Test programs:
Version list extended to include the "safe config." option