Erbe VIO 200 D - Modifications for VIO Version 1.5.x

13 / 144
2 • Modifications
Art.-Nr.: 80116-271 04.06
As from VIO version 1.5.x
Hardware
Software
Component affected Description of the modification
EIP 2 module The EIP 2 irrigation pump can be attached to the VIO HF
surgical unit and operated via said unit.
HF generator Development of a new HF generator module which will be
recognized and supported by VIO D devices from software
version 1.5.x onward.
Component affected Description of the modification
SET-UP settings SET-UP level 2:
SET-UP level 2 is available in English only – regardless of the
country setting selected on the device.
New SET-UP settings:
max. APC cyl. pressure
SWIFT ° replaces DRY °/SWIFT °
(only relevant for VIO 300 D)
DRY ° replaces DRY °/SWIFT °
(only relevant for VIO 300 D)
Decoupling C (C = capacitor)