Command Line Interface
90 1553-CNH 160 0787 Uen PA2 2005-09-23
• dslport <dslport> - The DSL-port to configure. The parame-
ter <a.b.c> refers to the ECN port (a), the ESN108 port (b) and
the IP DSLAM line (c).
• pvc <pvc> - Configure the specified PVC number 1-8
• atm-service-class <class> - 4 ATM service classes (PVC
types) can be configured:
− ubr: UBR service is Unspecified Bit Rate, which is used for
data transmissions.
− vbr-nrt: VBR-nrt service is Variable Bit Rate non real time,
which is used for video transmissions. It provides a specified
throughput capacity but data is not sent evenly.
− vbr-rt: VBR-rt service is Variable Bit Rate real time, which is
used for real time applications such as Telephony over IP.
− cbr: CBR service is Constant Bit Rate transmissions, which
can be used for Telephony over IP. It specifies a fixed bit rate
so that data is sent in a steady stream. The configured bit rate
is reserved by the PVC, but can be used by other services if
there is no data to send.
• upstream-policing enable/disable - Enable or disable
upstream policing
• vci <vci> - Sets the VCI (Virtual Channel ID) as identification of
the PVC. Range 0-255.
• vpi <vpi> - Sets the VPI (Virtual Path ID) as identification of the
PVC. Range 0-15.
Default Settings
atm-service-class: UBR
upstream-policing: disabled
vpi: 0
vci:
− X+31
− 32 for PVC 1;
To Next Page
Loading...
