AT Commands Modem Terminated 177
AT+FK Session Termination
AT+FLID Local ID String
Read command: AT+FET? Displays the current <ppm> setting.
Test command: AT+FET=? Shows if the command is supported.
Test command
response:
+FET: (list of supported <ppm>s)
Parameter:
<ppm>:
<ppm> Description
0 Another page next, same document
1 Another document next
2 No more page(s) or document(s)
Example: AT+FET=0
+FTPS: 1
OK
AT+FET?
0
OK
AT+FET=?
+FET: (0-2)
OK
Description: Causes the TAE to terminate the session in an orderly manner.
Execution command: AT+FK
Unsolicited result code:+FHNG: <hsc>
Example: AT+FK
+FHNG: 2
OK
Description: Allows user to define the local ID string.
Set command: AT+FLID=<ID_string>
Read command: AT+FLID? Displays the current <ID_string> content.
Test command: AT+FLID=? Shows if the command is supported.
Test command
response:
+FLID: (<string length>)(supported ASCII values).
Parameter:
<ID_string>: String; 20 characters.