Ericsson T39 - Page 180

AT Commands Modem Terminated 178
AT+FLNFC Page Length Format Conversion
AT+FLPL Indicate Document to Poll
Example: AT+FLID=”Ericsson”
OK
AT+FLID?
Ericsson
OK
AT+FLID=?
+FLID: (20)(30-127)
Description: Determines the TAE response to a mismatch between the page length negotiated for
the facsimile session, indicated by the optional AT+FDT <ln> parameter, or the
AT+FDIS <ln> parameter for AT+FDR operation.
A mismatch would require clipping or scaling a longer format to a shorter one.
Set command: AT+FLNFC=<value>
Read command: AT+FLNFC? Displays the current <value> setting.
Test command: AT+FLNFC=? Shows if the command is supported.
Test command
response:
+FLNFC: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 Disables mismatch checking
Description: Indicates which document that should be polled.
Set command: AT+FLPL=<value>
Read command: AT+FLPL? Displays the current <value> setting.
Test command: AT+FLPL=? Shows if the command is supported.
Test command
response:
+FLPL: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 Indicates that the TE has no document to poll
Default setting
1 Document available for polling