Ericsson T39 - Page 181

AT Commands Modem Terminated 179
AT+FMDL Request Model Identification
AT+FMFR Request Manufacturer Identification
AT+FMINSP Minimum Phase 3 Speed
Description: Returns the model identification of a Class 2 fax machine.
Read command: AT+FMDL?
Read command
response:
<TAE model identification>
Description: Returns the manufacturer identification of a Class 2 fax machine.
Read command: AT+FMFR?
Example: AT+FMFR
Ericsson
OK
Description: Limits the lowest negotiable speed for a session. If a facsimile cannot negotiate to a
minimum speed, it will perform an orderly disconnect.
Set command: AT+FMINSP=<br>
Read command: AT+FMINSP? Displays the current <br> setting.
Test command: AT+FMINSP=? Shows if the command is supported.
Test command
response:
+FMINSP: (list of supported <br>s)
Parameter:
<br>:
<br> Description
0 2400 bits/s V.27ter
Default setting
1 4800 bits/s V.27ter
2 7200 bits/s V.29 or V.17
3 9600 bits/s V.29 or V.17
4 12000 bits/s V.33 or V.17
5 14400 bits/s V.33 or V.17