Ericsson T39 - Page 183

AT Commands Modem Terminated 181
AT+FRBC Phase C Receive Data Block Size
AT+FREL Phase C Received EOL Alignment
AT+FSPL Request to Poll
Description: Selects stream mode or block mode for Phase C data transfer.
Set command: AT+FRBC=<value>
Read command: AT+FRBC? Displays the current <value> setting.
Test command: AT+FRBC=? Shows if the command is supported.
Test command
response:
+FRBC: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 Stream mode only
Default setting
Description: Sets the EOL alignments for received Phase C data.
Set command: AT+FREL=<value>
Read command: AT+FREL? Displays the current <value> setting.
Test command: AT+FREL=? Shows if the command is supported.
Test command
response:
+FREL: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 EOL patterns are bit-aligned as received
Default setting
Description: Enables or disables the polling parameter.
Set command: AT+FSPL=<value>
Read command: AT+FSPL? Displays the current <value> setting.
Test command: AT+FSPL=? Shows if the command is supported.
Test command
response:
+FSPL: (list of supported <value>s)
Parameter:
<value>:
<value> Description
0 The TE does not want to poll
Default setting