ESAB Aristo U8 - Default Chapter; Table of Contents

-- 2 --
TOCe
Rights reserved to alter specifications without notice.
1 INTRODUCTION 6...................................................
1.1 Equipment 6................................................................
1.2 Do this first 6...............................................................
1.3 Display 8...................................................................
1.3.1 Symbols in the display 8.................................................
1.4 Keys 9.....................................................................
1.5 About settings 9.............................................................
1.5.1 Setting numverical values 9..............................................
1.5.2 Setting fixed options 10...................................................
1.5.3 ON/OFF or YES/ NO settings 10...........................................
1.6 ENTER and QUIT 10.........................................................
2 MENUS 11...........................................................
2.1 Main menu 11...............................................................
2.1.1 Auxiliary functions menu 11...............................................
2.1.2 Weld data setting menu 12................................................
2.1.3 Measure image 12.......................................................
2.1.4 Memory functions menu 13...............................................
2.1.5 Fast mode menu 13......................................................
2.2 Menu structure 14............................................................
3 MIG/MAG WELDING 15................................................
3.1 Settings in the weld data setting menu 15........................................
3.1.1 MIG/MAG welding with dip/spray 15........................................
3.1.2 MIG/MAG welding with pulsing 16.........................................
3.2 Function explanations for settings 17............................................
3.2.1 Voltage 17..............................................................
3.2.2 Wire feed speed 17......................................................
3.2.3 Inductance 17...........................................................
3.2.4 Regulator type 17........................................................
3.2.5 Pulse current 17.........................................................
3.2.6 Pulse time 17...........................................................
3.2.7 Pulse frequency 17......................................................
3.2.8 Background current 18...................................................
3.2.9 Slope 18...............................................................
3.2.10 Ka 18..................................................................
3.2.11 Ki 18...................................................................
3.2.12 Synergy 18.............................................................
3.2.13 Gas pre--flow 18.........................................................
3.2.14 Creep start 19...........................................................
3.2.15 Hot Start 19.............................................................
3.2.16 Crater filling 19..........................................................
3.2.17 Pinch--off pulse 20.......................................................
3.2.18 Burnback time 20........................................................
3.2.19 Gas post--flow 20........................................................
3.2.20 Limits 20...............................................................
3.2.21 Spot welding 20.........................................................
4 MMA WELDING 20....................................................
4.1 Settings in the weld data setting menu 21........................................
4.2 Function explanations for settings 21............................................
4.2.1 Current 21..............................................................
4.2.2 Arc force 21.............................................................
4.2.3 Min. current factor 21....................................................
4.2.4 Synergy 21.............................................................
4.2.5 Limits 21...............................................................