-- 6 --
bi09dinte
1 INTRODUCTION
In order to get the maximum benefit from your welding equipment, we recommend
that you r ead this instruction m anual.
For general information about operation, see the power source’s instruction manual.
The text shown in the display is available in the following languages:
English, Swedish, Finnish, Norwegian, Danish, German, French, Italian, Dutch,
Spanish, Portuguese, Hungarian, Polish, US English and Czech.
1.1 Equipment
U8 is supplied with a holder, 3 spacer screws and an English instruction manual.
The instruction manuals and the spare parts list are available in other languages on
the Internet at www.esab.com
Under ”Products” and ”Welding & cutting equipment”, you will find a link to the page
where you can both search for and download instructions and spare parts lists.
1.2 Do this first
This menu appears in the display when you start the machine for the first time.
When delivered, the controller is set to English. To select your language, do as
follows:
Press to bring up the main menu.
ESAB Mig
Using the arrow
keys, move the
cursor to the line for
AUXILIARY
FUNCTIONS
Press ENTER
PROCESS: MIG/MAG
METHOD: DIP / SPRAY
WIRE TYPE: Fe
SHIELDING GAS: Ar+8%CO2
WIRE DIMENSION: 1.2 mm
AUXILIARY FUNCTIONS
"
SET MEASURE MEMORY
FAST
MODE
ENTER
GB
To Next Page
Loading...
Need help?
General
