-- 3 8 --
bi09d1e2
Highlight DELETE and press ENTER. COPY
DELETE
RENAME
The file/folder has now been deleted.
A folder can only be deleted if it is empty, i.e. the files inside the folder must be
deleted first.
10.5 Changing the name of a file/folder
Highlight the file or folder to have its name changed and press ALT. Highlight
RENAME and press ENTER.
A keyboard will then appear in the display. Use the a rrow keys to highlight the
character/function you want to use and then press the PRESS KEY soft key. Once
the file/folder name is complete, confirm using enter
.
10.6 Copying files
Highlight the file to be copied and press ALT. Highlight COPY and press ENTER.
Highlight the name of the folder into which the file is to be copied, or a file name in
the folder, and press ALT. Highlight PASTE and press ENTER.
The copy is saved as Copy of plus the original name, e.g. Copy of WeldData.awd.
10.7 Recalling welding data
When a file with the extension .awd is highlighted, the ALT function also offers a
RECALL option. RECALL recalls welding data from the file to the welding data
memory so that you can use the settings when welding.
RECALL does not overwrite the entire welding data memory, just the memory
positions that have a value in the file. This means that if there were welding data
settings stored at position 1 and 3 when the file was created, the file only overwrites
position 1 and 3 when it is recalled. The remaining memory positions retain the
values they had prior to the recall.
GB
To Next Page
Loading...
