-- 3 5 --
bi09d1e2
Weld data setting number 5 has now been copied to memory position 50.
If memory position 50 is already taken, you are informed of this on the display.
COPY WELD DATA NO. 5 TO NO. 50
550
" DIP/SPRAY, Fe, CO2, 1.2 mm
QUIT ENTER
Return to the memory menu by pressing the QUIT key.
9 AUXILIARY FUNCTIONS
Main menu ----> Auxiliary functions menu
This menu contains the following submenus:
S File manager, see chapter 10.
S Weld data set, see chapter 11
S Configuration, see chapter 12.
S Quality functions, see chapter 13.
S Production statistics, see chapter 14.
S Error log, see chapter 15.
S User--defined synergic data, see chapter 16.
S Limit editor, see chapter 17.
10 FILEMANAGER
Main menu ----> Auxiliary function s menu ----> Filemanager
The file manager allows you to manage information partly in the controller’s internal
memory (R:\) and partly in a compact flash memory or PC--card (PCMCIA) (C:\).
The file manager enables manual saving, deleting and copying of welding data and
quality data, and recall of welding data.
The file manager remembers where you were when you last used the file manager
so that you return to the same location in the file structure when you resume.
To obtain information on the amount of storage space remaining for each memory,
use the INFO function.
GB
To Next Page
Loading...
