ESAB Aristo U8 - 8.4 Recalling Weld Data

-- 3 3 --
bi09d1e2
DELETE WELD DATA NO. 5
Press ENTER to confirm
the deletion of data set
number 5.
5
" DIP/SPRAY, Fe, CO2, 1.2 mm
QUIT ENTER
Return to the memory menu by pressing the QUIT key.
NOTE! If MIG SUPERPULSE is deleted, both of the memory positions 5 and 6 will
be deleted.
8.4 Recall
We are now going to recall a stored data set:
MEMORY FUNCTIONS -- STORED DATA SETS
Press the RECALL key.
5
STORE DELETE RECALL COPY QUIT
The most recently saved data set is automatically selected. If more than one data set
is stored, you can move the cursor between them using the arrow left and arrow right
keys.
RECALL WELD DATA NO. 10
Press ENTER to confirm
that you want to recall data
set number 5.
5
" DIP/SPRAY, Fe, CO2, 1.2 mm
QUIT ENTER
GB