-- 5 7 --
bi09d1e2
14 PRODUCTION STATISTICS
Main menu ----> Auxiliary function menu ----> Production statistics
Production statistics are used to keep track of the total arc time, the total volume of
material used and the number of welds since the last reset. They also keep track of
the arc time and the amount of material used for the last weld. For further reference,
the display also shows the wire material consumed per unit of length, and when the
last reset took place.
The number of welds is not increased if the arc time was less than 1 second. The
display therefore does not show how much material was consumed for such a short
weld. However, material consumption and the time are included when calculating the
total m aterial consumption and arc time.
PRODUCTION STATISTICS
LAST WELD TOTALT
ARC TIME
CONSUMED WIRE
BASED ON
NUMBER OF WELDS
0s
0g
8.9 g/m
0s
0g
0
LAST RESET 26--MAY--03 16.55.13
RESET QUIT
When you press RESET all counters are reset to zero, and the date and time show
the last r eset.
If you do not reset the counters, these are all automatically reset when one of then
has reached its maximum value.
Maximum counter values
Time 999 hours, 59 minutes, 59 seconds
Weight 13350000 grams
Quantity 65535
GB
To Next Page
Loading...
