EtherWAN EW50 User Manual

EW50 Industrial LTE Cellular Gateway
100
DNS & DDNS Setting
Go to Basic Network > DNS & DDNS > Configuration Tab.
The DNS & DDNS setting allows user to setup Dynamic DNS feature and DNS redirect rules.
Setup Dynamic DNS
The gateway allows you to customize Dynamic DNS settings.
DDNS (Dynamic DNS) Configuration
Item
Value setting
Description
DDNS
Unchecked by default
Check the Enable box to activate this function.
WAN Interface
WAN 1 is set by default
Select the WAN Interface IP Address of the gateway.
Provider
DynDNS.org (Dynamic) is
set by default
Select your DDNS provider of Dynamic DNS. It can be DynDNS.org(Dynamic),
DynDNS.org(Custom), NO-IP.com, etc...
Host Name
1. String format, any text
2. Required setting
Your registered host name of Dynamic DNS.
Value Range: 0 ~ 63 characters.
User Name / E-
Mail
1. String format, any text
2. Required setting
Enter your User name or E-mail addresss of Dynamic DNS.
Password / Key
1. String format, any text
2. Required setting
Enter your Password or Key of Dynamic DNS.
Save
N/A
Click Save to save the settings
Undo
N/A
Click Undo to cancel the settings

EtherWAN EW50 Specifications

General

Brand	EtherWAN
Model	EW50
Category	Gateway
Language	English