EtherWAN EW50 User Manual

EW50 Industrial LTE Cellular Gateway
106
When MAC Address-based is selected, only MAC addresses can be added in
Member to Join.
When Host Name-based is selected, only host names can be added in Member
to Join.
Note: The available Group Types will differ depending on the device model.
Member to Join
N/A
Add the members to the group in this field.
You can enter the member information as specified in the Member Type above,
and press the Join button to add.
Only one member can be added at a time.
Member List
NA
This field will indicate the hosts (members) contained in the group.
Bound Services
The boxes are
unchecked by default
Binding services applied to the host group. If you enable the Firewall, the
produced group can be used in firewall service. Note: The supported service
type may differ depending on product model.
Group
Unchecked by default
Check the Enable checkbox to activate the host group rule. The group will be
bound to the selected service(s) for further configuration.
Save
N/A
Click Save to save the settings
Undo
N/A
Click Undo to cancel the settings

EtherWAN EW50 Specifications

General

Brand	EtherWAN
Model	EW50
Category	Gateway
Language	English