EtherWAN EW50 User Manual

EW50 Industrial LTE Cellular Gateway
179
DHCP-Proxy Mode is unchecked (disabled).
Netmask
By default - select one - is
selected.
Specify the Netmask setting for the OpenVPN server. It will be assigned to the
connected OpenVPN clients.
Value Range: 255.255.255.0/24 (only support class C)
Note_1: Netmask will be available when TAP is chosen in Tunnel Device, and
DHCP-Proxy Mode is unchecked (disabled).
Note_2: Netmask will also be available when TUN is chosen in Tunnel Device.
Redirect Default
Gateway
1. Optional setting.
2. Unchecked by default
Check the Enable box to activate the Redirect Default Gateway function.
Encryption
Cipher
1. Required setting.
2. By default Blowfish is
selected.
Specify the Encryption Cipher from the dropdown list.
Select from Blowfish/AES-256/AES-192/AES-128/None.
Hash Algorithm
By default SHA-1 is
selected.
Specify the Hash Algorithm from the dropdown list.
Select from SHA-1/MD5/MD4/SHA2-256/SHA2-512/None/Disable.
LZO
Compression
By default Adaptive is
selected.
Specify the LZO Compression scheme.
Select from Adaptive/YES/NO/Default.
Persis Key
1. Optional setting.
2. The box is checked by
default.
Check the Enable box to activate the Persis Key function.
Persis Tun
1. Optional setting.
2. The box is checked by
default.
Check the Enable box to activate the Persis Tun function.
Advanced
Configuration
N/A
Click the Edit button to specify the Advanced Configuration setting for the
OpenVPN server.
If the button is clicked, Advanced Configuration will be displayed below.
Save
N/A
Click Save to save the settings.
Undo
N/A
Click Undo to cancel the changes.

EtherWAN EW50 Specifications

General

Brand	EtherWAN
Model	EW50
Category	Gateway
Language	English