EasyManuals Logo

EtherWAN EW50 User Manual

Default Icon
320 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #196 background imageLoading...
Page #196 background image
EW50 Industrial LTE Cellular Gateway
196
“user name”, “password” and server’s global IP. In addition, it is required to identify the operation mode for
each tunnel as main connection, failover for another tunnel, or load balance tunnel to increase overall
bandwidth. Select “Default Gateway” or Remote Subnet” for packet flow. You can also define what kind of
traffic will pass through the PPTP tunnel in the “Default Gateway / Remote Subnet” parameter.
For the PPTP client peer, a Remote Subnet item
is required. It is for the Intranet of PPTP server
peer. At PPTP client peer, the packets whose
destination is in the dedicated subnet will be
transferred via the PPTP tunnel. Others will be
transferred based on current routing policy of
the gateway at PPTP client peer. But, if 0.0.0.0/0
is entered in the Remote Subnet field, it will be
treated as a "Default Gateway" setting for the
PPTP client peer, and all packets, including the
Internet accessing of PPTP client peers, will go
through the established PPTP tunnel. That
means the remote PPTP server peer controls the
flow of any packets from the PPTP client peer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EtherWAN EW50 and is the answer not in the manual?

EtherWAN EW50 Specifications

General IconGeneral
BrandEtherWAN
ModelEW50
CategoryGateway
LanguageEnglish