EtherWAN EW50 - Page 216

EW50 Industrial LTE Cellular Gateway
216
Setup Intrusion Prevention Rules
Item Name
Value setting
Description
SYN Flood
Defense
1. Required setting
2. Unchecked by default
3. Traffic threshold is set to 300 by default
4. The value range can be from 10 to
10000.
Click Enable box to activate this intrusion prevention rule and
enter the traffic threshold in this field.
UDP Flood
Defense
Click Enable box to activate this intrusion prevention rule and
enter the traffic threshold in this field.
ICMP Flood
Defense
Click Enable box to activate this intrusion prevention rule and
enter the traffic threshold in this field.
Value Range: 10 ~ 10000.
Port Scan
Defection
1. Required setting
2. Unchecked by default
3. Traffic threshold is set to 200 by default
4. The value range can be from 10 to
10000.
Click Enable box to activate this intrusion prevention rule and
enter the traffic threshold in this field.
Value Range: 10 ~ 10000.
Block Land
Attack
Unchecked by default
Click Enable box to activate this intrusion prevention rule.
Block Ping of
Death
Block IP Spoof
Block TCP Flag
Scan
Block Smurf