EW50 Industrial LTE Cellular Gateway
27
Internet Connection List - Ethernet WAN
WAN Type for Ethernet Interface:
Ethernet is the most common WAN and uplink interface for M2M gateways. Usually it is connected with xDSL
or cable modem for you to setup the WAN connection. There are various WAN types for connection with an
ISP.
• Static IP: Select this option if the ISP provides a fixed IP. This is usually is more expensive, but important
for cooperate requirements.
• Dynamic IP: The assigned IP address for the WAN by a DHCP server is different every time. This is cheaper
and usually for consumer use.
• PPP over Ethernet: As known as PPPoE. This WAN type is widely used for ADSL connection. IP is usually
different for every dial up.
• PPTP: This WAN type is popular in some countries, like Russia.
• L2TP: This WAN type is popular in some countries, like Israel.
Configure Ethernet WAN Setting
When the Edit button is applied, the Internet Connection Configuration screen will appear. WAN-1 interface is
used in this example.
To Next Page
Loading...
General