EtherWAN EW50 - Page 289

EW50 Industrial LTE Cellular Gateway
289
IP
1. NA for Serial on Modbus
Mode.
2. Required setting for TCP
on Modbus Mode.
Specify the IP for TCP on Modbus Mode. IPv4 Format.
Port
1. NA for Serial on Modbus
Mode.
2. Required setting for TCP
on Modbus Mode.
Specify the Port for TCP on Modbus Mode.
Value Range: 1 ~ 65535.
Device ID
1. Numeric String format
2. Required setting
Specify the Device ID of the Modbus device. It can be from 1 to 247.
Register
1. Numeric String format
2. Required setting
Specify the Register number of the Modbus device.
Value Range: 0 ~ 65535.
Logic
Comparator
Logic Comparator ‘>’ by
default.
Specify the Logic Comparator for Notifying Events. It can be ‘>’, ‘<’, ‘=’, ‘>=’, or
‘<=’.
Value
1. Numeric String format
2. Required setting
Specify the Value.
Value Range: 0 ~ 65535.
Enable
Unchecked by default
Click Enable box to activate this profile setting.
Save
NA
Click the Save button to save the configuration
Undo
NA
Click the Undo button to restore what you just configured back to the previous
setting.