EtherWAN EW50 - Page 291

EW50 Industrial LTE Cellular Gateway
291
2. Required setting for TCP
on Modbus Mode.
Port
1. NA for Serial on Modbus
Mode.
2. Required setting for TCP
on Modbus Mode.
Specify the Port for TCP on Modbus Mode.
Value Range: 1 ~ 65535.
Device ID
1. Numeric String format
2. Required setting
Specify the Device ID of the Modbus device.
Value Range: 1 ~ 247.
Register
1. Numeric String format
2. Required setting
Specify the Register number of the Modbus device.
Value Range: 0 ~ 65535.
Value
1. Numeric String format
2. Required setting
Specify the Value.
Value Range: 0 ~ 65535.
Enable
Unchecked by default
Click Enable box to activate this profile setting.
Save
NA
Click the Save button to save the configuration
Undo
NA
Click the Undo button to restore previous settings.