EW50 Industrial LTE Cellular Gateway
46
addresses are allowed in this subnet. However, one of them is occupied by the
LAN IP address of this gateway, so there are a maximum of 253 clients allowed
in LAN network.
Value Range: 255.0.0.0 (/8) ~ 255.255.255.252 (/30).
Click the Save button to save the configuration
Click the Undo button to restore previous settings.
Create / Edit Additional IP
This gateway provides the LAN IP alias function for special management considerations. You can add additional
LAN IPs for this gateway, and access this gateway through the additional IPs.
When Add button is applied, THHE Additional IP Configuration screen will appear.
Enter the name for the alias IP address.
1. Required setting
2. lo is set by default
Specify the Interface type. It can be lo or br0.
1. Optional setting
2. 192.168.123.254 is set by
default
Enter the additional IP address for this device.
1. Required setting
2. 255.255.255.0 (/24) is set
by default
Select the subnet mask for this gateway from the dropdown list.
Subnet mask defines how many clients are allowed in one network or subnet.
The default subnet mask is 255.255.255.0 (/24), and it means maximum 254 IP
addresses are allowed in this subnet. However, one of them is occupied by LAN
IP address of this gateway, so there are a maximum of 253 clients allowed in the
LAN network.
Value Range: 255.0.0.0 (/8) ~ 255.255.255.255 (/32).
Click the Save button to save the configuration