EW50 Industrial LTE Cellular Gateway
54
Select which LAN port(s) and VAP(s) that you want to add to the rule.
Note: The available member list will depend on product model.
All WANs is selected by
default.
Select which WAN or All WANs that allow accessing Internet.
Note: If Bridge mode is selected, you need to select a WAN and enter a VID.
Assign an IP Address for the DHCP Server that the rule used, this IP address is a
gateway IP.
255.255.255.0(/24) is
selected by default.
Select a Subnet Mask for the DHCP Server.
Server is selected by default.
Define the DHCP Server type.
There are three types: Server, Relay, and Disable.
Relay: Select Relay to enable DHCP Relay function for the VLAN group. You only
need to fill the DHCP Server IP Address field.
Server: Select Server to enable DHCP Server function for the VLAN group. You
need to specify the DHCP Server settings.
Disable: Select Disable to disable the DHCP Server function for the VLAN group.
DHCP Server
IP Address
(for DHCP
Relay only)
If you select Relay type of DHCP Server, assign a DHCP Server IP Address that
the gateway will relay the DHCP requests to the assigned DHCP server.
Define name of the DHCP Server.
Define the IP Pool range.
There are Starting Address and Ending Address fields. If a client requests an IP
address from this DHCP Server, it will assign an IP address in the range of IP
pool.
Define a period of time for an IP Address that the DHCP Server leases to a new
device. By default, the lease time is 86400 seconds.
The Domain Name of this DHCP Server.
Value Range: 0 ~ 31 characters.
The Primary DNS of this DHCP Server.
The Secondary DNS of this DHCP Server.
The Primary WINS of this DHCP Server.
The Secondary WINS of this DHCP Server.
The Gateway of this DHCP Server.
Click Enable box to activate this rule.
Click the Save button to save the configuration
Click the Undo button to restore previous settings.