EtherWAN EW50 - Page 61

EW50 Industrial LTE Cellular Gateway
61
DHCP Server Configuration
Item
Value setting
Description
DHCP Server
Name
1. String format, any text
2. Required setting
Enter a DHCP Server name.
LAN IP
Address
1. IPv4 format.
2. Required setting
The LAN IP Address of this DHCP Server.
Subnet Mask
255.0.0.0 (/8) is set by
default
The Subnet Mask of this DHCP Server.
IP Pool
1. IPv4 format.
2. Required setting
The IP Pool of this DHCP Server. It is composed of Starting Address entered in
this field and Ending Address entered in this field.
Lease Time
1. Numeric string format.
2. Required setting
The Lease Time of this DHCP Server.
Value Range: 300 ~ 604800 seconds.
Domain Name
String format, any text
The Domain Name of this DHCP Server.
Primary DNS
IPv4 format
The Primary DNS of this DHCP Server.
Secondary
DNS
IPv4 format
The Secondary DNS of this DHCP Server.
Primary WINS
IPv4 format
The Primary WINS of this DHCP Server.
Secondary
WINS
IPv4 format
The Secondary WINS of this DHCP Server.
Gateway
IPv4 format
The Gateway of this DHCP Server.
Server
Unchecked by default
Click Enable box to activate this DHCP Server.
Save
N/A
Click the Save button to save the configuration
Undo
N/A
Click the Undo button to restore what you just configured back to the previous
setting.
Back
N/A
When the Back button is clicked the screen will return to the DHCP Server
Configuration page.
Create / Edit Mapping Rule List on DHCP Server
The gateway allows you to customize your Mapping Rule List on DHCP Server. It supports up to a maximum of
64 rule sets. When Fix Mapping button is applied, the Mapping Rule List screen will appear.
When Add button is applied, the Mapping Rule Configuration screen will appear.